recodex-wiki/Rewritten-docs.md

<!---
Notes:

* Dvoustrankovy uvod - co by to melo umet
* Analýza - co se rozhodneme delat, jak by se to dalo delat, pridelit dulezitost
  - pak se da odkazat na to, proc jsme co nestihli, zahrnout i advanced featury
	- odkazovat se u featur, ze to je v planu v pristich verzi - co je dulezite
	  a co ne!! Zduvodnit tim, jakou podmnozinu featur nechat, snaze se pak bude
	  popisovat architektura 
* V analyze vysvetlit architekturu 
* Related works nechat jako samostatnou kapitolu 
* Poradi - pozadavky -> related works -> analyza 
* Provazani komponent musi rozumet administrator a tvurce ulohy - obecna
  kapitola v analyze - puvodni kapitola o analyze byla povedena, jen se tam
  micha seznam zprav nebo co - to nezajima vsechny 
* Po obecnym uvodu - rozdelit podle potencialniho ctenare - uzivatel ucitel, pak
  uzivatel admin 
* Instalacni dokumentace stranou, jako posledni 
* Uzivatelaka dokumentace - admin: popis prav, autor uloh: nejobsahlejsi, format
  skriptu - ale formulovat tak, ze bude popis na co kde kliknout, jazyk popsat
  separatne - v budoucnu to bude irelevantni, je potreba daleko hloubeji - je
  treba popsat detailne co eelaji, i treba relativni/absolutni adresy, makra,
  kde vidi prekladac knihovny a headery... - kapitola na konci 
* Uzivatelska dokumentace pro studenta: vysvetleni  
* Jak se boduje uloha - tezko rict, kam to patri - nekde na zacatku? Ale zajima
  to vsechny role, ucitel musi vedet, jak to nakonfigurovat - zminit treba i jak
  bodovat podle casu a pameti (v analyze nebo v uvodu) - vice vystupu od judge,
  interpolace bodu podle vyuziti pameti... je to spis mimo uživatelskou 
* Nepsat kde na jake tlacitko kliknout 
* Tutorialy - scenare, co udelat kdyz chci neco, vzorove pruchody 
* U formularu je nejlepsi kdyz zadna dokumentace neni, doplnit popisky k polim
  formularu 
* V dokumentaci popsat konfigy nekde separatne - skore, yaml - referencni
  dokumentace 
* Urcite ne FAQ, vic strukturovane 
* Instalaci dohromady na konec 
* Programatorska dokumentace - "nejmene ctenaru" - neco uz tam mame, neni to
  treba davat do tistene dokumentace - do tistene dokumentace dat odkaz na wiki,
  neco v tistene ale byt musi - jaky jazyk, designové rozhodnutí - zdůvodnění
  nedávat do úvodní analýzy - k referencnim dokumentacim udelat uvod - "restove
  API jsme pojali timto zpusobem, deli se to na tyto skupiny, ..." 
* Co zvolena architektura znamena, neco to ma dat i uzivateli, ktery
  architekturu nezna, kde je drzenej stav 
* Z dokumentace musi byt patrne, co dela knihovna a co se musi udelat rucne -
  kolik je to prace - psat to vic pro uzivatele, ktery zna technologie, nezna
  knihovny 
* Mit soucit s tema, ktery to toho tolik neznaji - jak technologie, tak
  architekturu a system CodExu 
* Nesedi cisla stranek 
* Stazeni ZIPu s vystupy Backendu - roztridit na verejne a tajne, verejne i pro
  studenta
-->

# Introduction

Generally, there are many different ways and opinions on how to teach people
something new. However, most people agree that a hands-on experience is one of
the best ways to make the human brain remember a new skill. Learning must be
entertaining and interactive, with fast and frequent feedback. Some kinds of
knowledge are more suitable for this practical type of learning than others, and
fortunately, programming is one of them.

University education system is one of the areas where this knowledge can be
applied. In computer programming, there are several requirements such as the
code being syntactically correct, efficient and easy to read, maintain and
extend. Correctness and efficiency can be tested automatically to help teachers
save time for their research, but reviewing bad design, bad coding habits and 
logical mistakes is really hard to automate and requires manpower.

Checking programs written by students takes a lot of time and requires a lot of
mechanical, repetitive work. The first idea of an automatic evaluation system
comes from Stanford University professors in 1965. They implemented a system
which evaluated code in Algol submitted on punch cards. In following years, many
similar products were written.

There are two basic ways of automatically evaluating code -- statically (check
the code without running it; safe, but not very precise) or dynamically (run the
code on testing inputs with checking the outputs against reference ones; needs
sandboxing, but provides good real world experience).

This project focuses on the machine-controlled part of source code evaluation.
First, general concepts of grading systems are observed, new requirements are
specified and project with similar functionality are examined. Also, problems of
the software previously used at Charles University in Prague are briefly
discussed. With acquired knowledge from such projects in production, we set up
goals for the new evaluation system, designed the architecture and implemented a
fully operational solution. The system is now ready for production testing at
the university.

## Assignment

The major goal of this project is to create a grading application that will be
used for programming classes at the Faculty of Mathematics and Physics of the
Charles University in Prague. However, the application should be designed in a
modular fashion to be easily extended or even modified to make other ways of
usage possible.

The system should be capable of dynamic analysis of programming code. It means,
that following four basic steps have to be supported:

1. compile the code and check for compilation errors
2. run compiled binary in a sandbox with predefined inputs
3. check constraints on used amount of memory and time
4. compare program outputs with predefined values

The project has a great starting point -- there is an old grading system
currently used at the university (CodEx), so its flaws and weaknesses can be
addressed. Furthermore, many teachers desire to use and test the new system and
they are willing to consult ideas or problems during development with us.

### Intended usage

The whole system is intended to help both teachers (supervisors) and students.
To achieve this, it is crucial to keep in mind typical usage scenarios of the
system and try to make these tasks as simple as possible.

The system has a database of users. Each user has assigned a role, which
corresponds to his/her privileges. There are user groups reflecting structure of
lectured courses. Groups can be hierarchically ordered to reflect additional
metadata such as the academic year. For example, a reasonable group hierarchy
can look like this:

```
Summer term 2016
|-- Language C# and .NET platform
|   |-- Labs Monday 10:30
|   `-- Labs Thursday 9:00
|-- Programming I
|   |-- Labs Monday 14:00
 ...
```

In this example, students are members of the leaf groups, the higher level
entities are just for keeping the related groups together. The hierarchy
structure can be modified and altered to fit specific needs of the university or
any other organization, even the flat structure (i.e., no hierarchy) is
possible. One user can be part of multiple groups and on the other hand one
group can have multiple users. Each user can have a specific role for every
group in which is a member, overriding his/her default role in this context.

Database of exercises (algorithmic problems) is another part of the project.
Each exercise consists of a text in multiple language variants, an evaluation
configuration and a set of inputs and reference outputs. Exercises are created
by instructed privileged users. Assigning an exercise to a group means to
choose one of the available exercises and specifying additional properties. An
assignment has a deadline (optionally a second deadline), a maximum amount of
points, a configuration for calculating the final score, a maximum number of
submissions, and a list of supported runtime environments (e.g., programming
languages) including specific time and memory limits for each one.

Typical use cases for supported user roles are illustrated on following UML
diagram:

![System use case diagram](https://github.com/ReCodEx/wiki/raw/master/images/System_use_case.png)

#### Exercise evaluation chain

The most important part of the system is evaluation of solutions submitted by
students. Concepts of consecutive steps from source code to final results
is described in more detail below to give readers solid overview of what have to
happen during evaluation process.

First thing users have to do is to submit their solutions through some user
interface. Then, the system checks assignment invariants (deadlines, count
of submissions, ...) and stores submitted files. The runtime environment is
automatically detected based on input files and suitable exercise configuration
variant is chosen (one exercise can have multiple variants, for example C and
Java languages). Matching exercise configuration is then used for taking care of
evaluation process.

There is a pool of worker computers dedicated to processing jobs. Some of them
may have different environment to allow testing programs in more conditions.
Incoming jobs are scheduled to particular worker depending on its capabilities
and job requirements.

Job processing itself stars with obtaining source files and job configuration.
The configuration is parsed into small tasks with simple piece of work.
Evaluation itself goes in direction of tasks ordering. It is crucial to keep
executive computer secure and stable, so isolated sandboxed environment is used
when dealing with unknown source code. When the execution is finished, results
are saved.

Results from worker contains only output data from processed tasks (this could
be return value, consumed time, ...). On top of that, one value is calculated to
express overall quality of the tested job. It is used as points for final
student grading. Calculation method of this value may be different for each
assignment. Data presented back to users include overview of job parts (which
succeeded and which failed, optionally with reason like "memory limit exceeded")
and achieved score (amount of awarded points).

## Requirements

There are bunch of different formal requirements for the system. Some of them
are necessary for any system for source code evaluation, some of them are
specific for university deployment and some of them arose during the ten year
long lifetime of the old system. There are not many ways to improve CodEx
experience from the perspective of a student, but a lot of feature requests come
from administrators and supervisors. The ideas were gathered mostly from our
personal experience with the system and from meetings with faculty staff
involved with the current system.

For clear arrangement all the requirements and wishes are presented grouped by
categories.

### System features

System features represents directly accessible functionality to users of the
system.  They describe the evaluation system in general and also university
addons (mostly administrative features).

#### Pure user requirements

- users have their own account in the system
- system users can be members of multiple groups (reflecting courses or labs)
- there is a database of exercises; teachers can create exercises including
  textual description, sample inputs and correct reference outputs (for example
  "sum all numbers from given file and write the result to the standard
  output")
- there is a list of assigned exercises in each group and interface to submit a
  solution; teachers can assign an existing exercise to their class with some
  specific properties set (deadlines, etc.)
- user can see a list of submitted solutions for each assignment with
  corresponding results
- teachers can specify way of computation grading points which will be awarded
  to the students depending on the quality of his/her solution for each
  assignment extra
- teachers can view detailed data about their students (users of a their groups)
  including all submitted solutions; also, each of the solution can be manually
  reviewed, commented and assigned additional points (positive or negative)
- one particular solution can be marked as accepted (used for grading this
  assignment); otherwise, the solution with most points is used
- teacher can edit student solution and privately resubmit it; optionally saving
  all results (including temporary ones)
- localization of all texts (UI and exercises)
- Markdown support for creating exercise texts
- tagging exercises in database and search by these tags
- comments, comments, comments (exercises, tests, solutions, ...)
- plagiarism detection

#### Administrative requirements

- users can use an intuitive user interface for interaction with the system,
  mainly for viewing assigned exercises, uploading their own solutions to the
  assignments, and viewing the results of the solutions after an automatic
  evaluation is finished; the two wanted interfaces are web and command-line
  based
- user privilege separation (at least two roles -- _student_ and _supervisor_)
- logging in through a university authentication system (e.g. LDAP)
- SIS (university information system) integration for fetching personal user
  data
- safe environment in which the students' solutions are executed
- support for multiple programming environments at once to avoid unacceptable
  workload for administrator (maintain separate installation for every course)
  and high hardware occupation
- advanced low-level evaluation flow configuration with high-level abstraction
  layer for ordinary configuration cases
- use of modern technologies with state-of-the-art compilers

### Technical details

Technical details are requirements of technical character with no direct mapping
to visible parts of system. In ideal word, users should not know about these if
they work properly, but would be at least annoyed if these requirements were not
met. Most notably they are these ones:

- user interface of the system accessible on users' computers without
  installation of any kind of additional software
- easy implementation of different user interfaces
- be ready for workload hundreds of students and tens of supervisors
- automated installation of all components
- source code with permissive license allowing further development; this also
  applies on used libraries and frameworks
- multi-platform worker supporting at least two major operating systems

### Conclusion

The survey shows that there are a lot of different requirements and wishes for
the new system. When the system is ready it is likely that there will be new
ideas of how to use the system and thus the system must be designed to be easily
extendable, so everyone can develop their own feature.  This also means that
widely used programming languages and techniques should be used, so users can
quickly understand the code and make changes.

To find out the current state in the field of automatic grading systems we did a
short market survey on the field of automatic grading systems at universities,
programming contests, and possibly other places where similar tools are
available.


## Related work

This is not a complete list of available evaluators, but only a few projects
which are used these days and can be an inspiration for our project. Each
project from the list has a brief description and some key features mentioned.

### CodEx

Currently used grading solution at the Faculty of Mathematics and Physics of
the Charles University in Prague which was implemented in 2006 by a group
of students. It is called [CodEx -- The Code Examiner](http://codex.ms.mff.cuni.cz/project/)
and it has been used with some improvements since then. The original plan was
to use the system only for basic programming courses, but there was a demand
for adapting it for many different subjects.

CodEx is based on dynamic analysis. It features a web-based interface, where
supervisors can assign exercises to their students and the students have a time
window to submit their solutions. Each solution is compiled and run in sandbox
(MO-Eval). The metrics which are checked are: correctness of the output, time
and memory limits. It supports programs written in C, C++, C#, Java, Pascal,
Python and Haskell.

Current system is old, but robust. There were no major security incidents
during its production usage. However, from today's perspective there are
several drawbacks. The main ones are:

- **web interface** -- The web interface is simple and fully functional. But
  rapid development in web technologies opens new horizons of how web interface
  can be made.
- **web API** -- CodEx offers a very limited XML API based on outdated
  technologies that is not sufficient for users who would like to create custom
  interfaces such as a command line tool or mobile application.
- **sandboxing** -- MO-Eval sandbox is based on principle of monitoring system
  calls and blocking the bad ones. This can be easily done for single-threaded
  applications, but proves difficult with multi-threaded ones. In present day,
  parallelism is a very important area of computing, so there is requirement to
  test multi-threaded applications too.
- **instances** -- Different ways of CodEx usage scenarios requires separate
  instances (Programming I and II, Java, C#, etc.). This configuration is not
  user friendly (students have to register in each instance separately) and
  burdens administrators with unnecessary work. CodEx architecture does not
  allow sharing hardware between instances, which results in an inefficient use
  of hardware for evaluation.
- **task extensibility** -- There is a need to test and evaluate complicated
  programs for classes such as Parallel programming or Compiler principles,
  which have a more difficult evaluation chain than simple
  compilation/execution/evaluation provided by CodEx.

### Progtest

[Progtest](https://progtest.fit.cvut.cz/) is private project of [FIT
ČVUT](https://fit.cvut.cz) in Prague. As far as we know it is used for C/C++,
Bash programming and knowledge-based quizzes.  There are several bonus points
and penalties and also a few hints what is failing in the submitted solution. It
is very strict on source code quality, for example `-pedantic` option of GCC,
Valgrind for memory leaks or array boundaries checks via `mudflap` library.

### Codility

[Codility](https://codility.com/) is a web based solution primary targeted to
company recruiters. It is a commercial product available as a SaaS and it
supports 16 programming languages. The
[UI](http://1.bp.blogspot.com/-_isqWtuEvvY/U8_SbkUMP-I/AAAAAAAAAL0/Hup_amNYU2s/s1600/cui.png)
of Codility is [opensource](https://github.com/Codility/cui), the rest of source
code is not available. One interesting feature is 'task timeline' -- captured
progress of writing code for each user.

### CMS

[CMS](http://cms-dev.github.io/index.html) is an opensource distributed system
for running and organizing programming contests. It is written in Python and
contains several modules. CMS supports C/C++, Pascal, Python, PHP, and Java
programming languages. PostgreSQL is a single point of failure, all modules
heavily depend on the database connection. Task evaluation can be only a three
step pipeline -- compilation, execution, evaluation. Execution is performed in
[Isolate](https://github.com/ioi/isolate), sandbox written by the consultant
of our project, Mgr. Martin Mareš, Ph.D.

### MOE

[MOE](http://www.ucw.cz/moe/) is a grading system written in Shell scripts, C
and Python. It does not provide a default GUI interface, all actions have to be
performed from command line. The system does not evaluate submissions in real
time, results are computed in batch mode after exercise deadline, using Isolate
for sandboxing. Parts of MOE are used in other systems like CodEx or CMS, but
the system is generally obsolete.

### Kattis

[Kattis](http://www.kattis.com/) is another SaaS solution. It provides a clean
and functional web UI, but the rest of the application is too simple. A nice
feature is the usage of a [standardized 
format](http://www.problemarchive.org/wiki/index.php/Problem_Format) for
exercises. Kattis is primarily used by programming contest organizers, company
recruiters and also some universities.


# Analysis

None of the existing projects we came across is capable of all the required
features for the new system. There is no grading system which is designed to
support a complicated evaluation pipeline, so this unexplored field has to be
designed with caution. Also, no project is modern and extensible enough so it
could be used as a base for the new system. After considering all these facts,
it is clear that a new system has to be written from scratch. This implies, that
only a subset of all the features will be implemented in the first version, the
others coming in the following releases.

Gathered features are categorized based on priorities for the whole system. The
highest priority has main functionality similar to current CodEx. It is a base
line to be useful in production environment, but a new design allows to easily
develop further. On top of that, most of ideas from faculty staff belongs to
second priority bucket, which will be implemented as part of the project. The
most complicated tasks from this category are advanced low-level evaluation
configuration format, using modern tools, connecting to a university systems and
merging separate system instances into single one. Other tasks are scheduled for
next releases after successful project defense. Namely, these are high-level
exercise evaluation configuration with user-friendly interface for common
exercise types, SIS integration (when some API will be available from their
side) and command-line submit tool. Plagiarism detection is not likely to be
part of any release in near future unless someone other makes the engine. The
detection problem is too hard to be solved as part of this project.

We named the new project as **ReCodEx -- ReCodEx Code Examiner**. The name
should point to the old CodEx, but also reflect the new approach to solve
issues. **Re** as part of the name means redesigned, rewritten, renewed, or
restarted.

At this point there is a clear idea how the new system will be used and what are
the major enhancements for future releases. With this in mind, the overall
architecture can be sketched. From the previous research, several goals are set
up for the new project. They mostly reflect drawbacks of the current version of
CodEx and some reasonable wishes of university users. Most notable features are
following:

- modern HTML5 web frontend written in JavaScript using a suitable framework
- REST API implemented in PHP, communicating with database, evaluation backend
  and a file server
- evaluation backend implemented as a distributed system on top of a message
  queue framework (ZeroMQ) with master-worker architecture
- multi-platform worker supporting Linux and Windows environment (latter
  without sandbox, no general purpose suitable tool available yet)
- evaluation procedure configured in a YAML file, compound of small tasks
  connected into an arbitrary oriented acyclic graph

The reasons supporting these decisions are explained in the rest of analysis
chapter. Also a lot of smaller design choices are mentioned including possible
options, what is picked to implement and why. But first, discuss basic concepts
of the system.

## Basic concepts

The system is designed as a web application. The requirements say, that user
interface must be accessible from students' computers without installation
additional software. This immediately implies that users are connected to the
internet, so it is used as communication medium. Today, there are two main ways
of designing graphical user interface -- native app or web page. Make nice and
multi-platform application with graphical interface is almost impossible because
of large number of different environments. Also, these applications often
requires installation or at least downloading its files (sources or binaries).
However, creating web application is easier, because every personal computer has
a internet browser installed. Also, browsers supports sort of unified and
standardized environment of HTML5 and JavaScript. CodEx is also web application
and everybody seems happy about it. There are other communicating channels every
user have available like email or git, but they are totally inappropriate for
designing user interfaces on top of them.

The application interacts with users. From the project assignment is clear, that
the system has to keep personalized data about users and adapt presented content
according to this knowledge. User data cannot be publicly visible, so that
implies necessity of user authentication. The application also has to support
multiple ways of authentication (university authentication systems, a company
LDAP server, an OAuth server...) and permit adding more security measures in the
future, such as two-factor authentication.

User data also includes a privilege level. From the assignment it is required to
have at least two roles, _student_ and _supervisor_. However, it is wise to add
_administrator_ level, which takes care of the system as a whole and is
responsible for core setup, monitoring, updates and so on. Student role has the
least power, basically can just view assignments and submit solutions.
Supervisors have more authority, so they can create exercises and assignments,
view results of students etc. From the university organization, one possible
level could be introduced, _course guarantor_. However, from real experience all
duties related with lecturing of labs are already associated with supervisors,
so this role seems not so useful. In addition, no one requested more than three
level privilege scheme.

School labs are lessons for some students lead by one (or sometimes two or
three) supervisors. Students have the same homework and supervisors are
evaluating its solutions. This organization has to be carried into the new
system. Counterpart to real labs are virtual groups. This concept was already
discussed in previous chapter including need for hierarchical structure of
groups. Right for attending labs has only a person, who is student of the
university and is recorded in university information system. To allow
restriction of group members in ReCodEx, there two type of groups -- _public_
and _private_. Public groups are open for every registered users, but to become
a member of private group one of its supervisors have to add that user. This
could be done automatically at beginning of the term with data from information
system, but unfortunately there is no such API yet. However, creating this API
is now considered by university leadership. Another just as good solution for
restricting membership of a group is to allow anyone join the group with
supplementary confirmation of supervisors. It has no additional benefits, so
approach with public and private groups is implemented.

Supervisors using CodEx in their labs usually set minimum amount of points
required to get a credit. These points can be get by solving assigned exercises.
To visually show users if they already have enough points, ReCodEx groups
supports setting this limit. There are two equal ways how to set a limit --
absolute value or relative value to maximum. The latter way seems nicer, so it
is implemented. The relative value is set in percents and is called threshold.

Our university has a few partner grammar schools. There were an idea, that they
could use CodEx for teaching informatics classes. To make the setup simple for
them, all the software and hardware would be provided by university and hosted
in their datacentre. However, CodEx were not prepared to support this kind of
usage and no one had time to manage a separate instance. With ReCodEx it is
possible to offer hosted environment as a service to other subjects. The concept
we figured out is based on user and group separation inside the system. There
are multiple _instances_ in the system, which means unit of separation. Each
instance has own set of users and groups, exercises can be optionally shared.
Evaluation backend is common for all instances. To keep track of active
instances and paying customers, each instance must have a valid _license_ to
allow users submit their solutions. License is granted for defined period of
time and can be revoked in advance if the subject do not keep approved terms and
conditions.

The main work for the system is to evaluate programming exercises. The exercise
is quite similar to homework assignment during school labs. When a homework is
assigned, two things are important to know for users:

- description of the problem
- metadata -- when and whom to submit solutions, grading scale, penalties, etc.

To reflect this idea teachers and students are already familiar with, we decided
to keep separation between problem itself (_exercise_) and its _assignment_.
Exercise only describes one problem and provides testing data with description
of how to evaluate it. In fact, it is template for assignments.  Assignment then
contains data from its exercise and additional metadata, which can be different
for every assignment of the same exercise. This separation is natural for all
users, in CodEx it is implemented in similar way and no other considerable
solution was found.

### Forgotten password

With authentication and some sort of dealing with passwords is related a problem
with forgotten credentials, especially passwords. People easily forget them and
there has to be some kind of mechanism to retrieve a new password or change the
old one. Problem is that it cannot be done in totally secure way, but we can at
least come quite close to it. First, there are absolutely not secure and
recommendable ways how to handle that, for example sending the old password
through email. A better, but still not secure solution is to generate a new one
and again send it through email. This solution was provided in CodEx, users had
to write an email to administrator, who generated a new password and sent it
back to the sender. This simple solution could be also automated, but
administrator had quite a big control over whole process. This might come in
handy if there could be some additional checkups for example, but on the other
hand it can be quite time consuming.

Probably the best solution which is often used and is fairly secure is
following. Let us consider only case in which all users have to fill their
email addresses into the system and these addresses are safely in the hands of
the right users. When user finds out that he/she does not remember a password,
he/she requests a password reset and fill in his/her unique identifier; it might
be email or unique nickname. Based on matched user account the system generates
unique access token and sends it to user via email address. This token should be
time limited and usable only once, so it cannot be misused. User then takes the
token or URL address which is provided in the email and go to the system's
appropriate section, where new password can be set. After that user can sign in
with his/her new password. As previously stated, this solution is quite safe and
user can handle it on its own, so administrator does not have to worry about it.
That is the main reason why this approach was chosen to be used.

### Evaluation unit executed by ReCodEx

One of the bigger requests for the new system is to support a complex
configuration of execution pipeline. The idea comes from lecturers of Compiler
principles class who want to migrate their semi-manual evaluation process to
CodEx. Unfortunately, CodEx is not capable of such complicated exercise setup.
None of evaluation systems we found can handle such task, so design from
scratch is needed.

There are two main approaches to design a complex execution configuration. It
can be composed of small amount of relatively big components or much more small
tasks. Big components are easy to write and whole configuration is reasonably
small. The components are designed for current problems, so it is not scalable
enough for pleasant future usage. This can be solved by introducing small set of
single-purposed tasks which can be composed together. The whole configuration is
then quite bigger, but with great adaptation ability for new conditions and also
less amount of work programming them. For better user experience, configuration
generators for some common cases can be introduced.

ReCodEx target is to be continuously developed and used for many years, so the
smaller tasks are the right choice. Observation of CodEx system shows that
only a few tasks are needed. In extreme case, only one task is enough -- execute
a binary. However, for better portability of configurations along different
systems it is better to implement reasonable subset of operations directly
without calling system provided binaries. These operations are copy file, create
new directory, extract archive and so on, altogether called internal tasks.
Another benefit from custom implementation of these tasks is guarantied safety,
so no sandbox needs to be used as in external tasks case.

For a job evaluation, the tasks needs to be executed sequentially in a specified
order. The idea of running independent tasks in parallel is bad because exact
time measurement needs controlled environment on target computer with
minimization of interrupts by other processes. It seems that connecting tasks
into directed acyclic graph (DAG) can handle all possible problem cases. None of
the authors, supervisors and involved faculty staff can think of a problem that
cannot be decomposed into tasks connected in a DAG. The goal of evaluation is
to satisfy as many tasks as possible. During execution there are sometimes
multiple choices of next task. To control that, each task can have a priority,
which is used as a secondary ordering criterion. For better understanding, here
is a small example.

![Task serialization](https://github.com/ReCodEx/wiki/raw/master/images/Assignment_overview.png)

The _job root_ task is imaginary single starting point of each job. When the
_CompileA_ task is finished, the _RunAA_ task is started (or _RunAB_, but should
be deterministic by position in configuration file -- tasks stated earlier
should be executed earlier). The task priorities guaranties, that after
_CompileA_ task all dependent tasks are executed before _CompileB_ task (they
have higher priority number). For example this is useful to control which files
are present in a working directory at every moment. To sum up, there are 3
ordering criteria: dependencies, then priorities and finally position of task in
configuration. Together, they define a unambiguous linear ordering of all tasks.

For grading there are several important tasks. First, tasks executing submitted
code need to be checked for time and memory limits. Second, outputs of judging
tasks need to be checked for correctness (represented by return value or by data
on standard output) and should not fail on time or memory limits. This division
can be transparent for backend, each task is executed the same way. But frontend
must know which tasks from whole job are important and what is their kind. It is
reasonable, to keep this piece of information alongside the tasks in job
configuration, so each task can have a label about its purpose. Unlabeled tasks
have an internal type _inner_. There are four categories of tasks:

- _initiation_ -- setting up the environment, compiling code, etc.; for users
  failure means error in their sources which are not compatible with running it
  with examination data
- _execution_ -- running the user code with examination data, must not exceed
  time and memory limits; for users failure means wrong design, slow data
  structures, etc.
- _evaluation_ -- comparing user and examination outputs; for user failure means
  that the program does not compute the right results
- _inner_ -- no special meaning for frontend, technical tasks for fetching and
  copying files, creating directories, etc.

Each job is composed of multiple tasks of these types which are semantically
grouped into tests. A test can represent one set of examination data for user
code. To mark the grouping, another task label can be used. Each test must have
exactly one _evaluation_ task (to show success or failure to users) and
arbitrary number of tasks with other types.

### Evaluation progress state

Users surely want to know progress state of their submitted solution this kind
of functionality comes particularly handy in long duration exercises. Because of
reporting progress users have immediate knowledge if anything goes wrong, not
mention psychological effect that whole system and its parts are working and
doing something. That is why this feature was considered from beginning but
there are multiple ways how to look at it in particular.

The very first idea would be to provide progress state based on done messages
from compilation, execution and evaluation. Which is something what a lot of
evaluation systems are providing. These information are high level enough for
users and they probably know what is going on and executing right now. If
compilation fails users know that their solution is not compilable, if execution
fails there were some problems with their program. The clarity of this kind of
progress state is nice and understandable. But as we learnt ReCodEx has to have
more advanced execution pipeline there can be more compilations or more
executions. And in addition parts of the system which ensure execution of users
solutions do not have to precisely know what they are executing at the moment.
This kind of information may be meaningless for them.

That is why another solution of progress state was considered. As we know right
now one of the best ways how to ensure generality is to have jobs with
single-purpose tasks. These tasks can be anything, some internal operation or
execution of external and sandboxed program. Based on this there is one very
simple solution how to provide general progress state which should be
independent on task types. We know that job has some number of tasks which has
to be executed so we can send state info after execution of every task. And that
is how we get percentual completion of an execution. Yes, it is kind of boring
and standard way but on top of that there can be built something else and more
appealing to users.

So displaying progress to users can be done numerous ways. We have percentual
completion which is of course begging for simple solution which is displaying
only the percentage or some kind of standard graphical progress bar. But that is
too mainstream lets try something else. Very good idea is to have some kind of
puzzled image or images which will be composed together according to progress.
Nice way but kind of challenging if we do not have designer around. Another
original solution is to have database of random kind-of-funny statements which
will be displayed every time task is completed. It is easy enough for
implementation and even for making up these messages and it is quite new and
original. That is why this last solution was chosen for displaying progress
state.

### Results of evaluation

There are lot of things which deserves discussion concerning results of
evaluation, how they should be displayed, what should be visible or not and also
what kind of reward for users solutions should be chosen.

At first let us focus on all kinds of outputs from executed programs within job.
Out of discussion is that supervisors should be able to view almost all outputs
from solutions if they choose them to be visible and recorded. This feature is
critical in debugging either whole exercises or users solutions. But should it
be default behaviour to record every output? Absolutely not, supervisor should
have a choice to turn it on, but discarding the outputs has to be the default
option. Even without this functionality a file base around whole ReCodEx system
can become quite large and on top of that outputs from executed programs can be
sometimes very extensive. Storing this amount of data is inefficient and
unnecessary to most of the solutions. However, on supervisor request this
feature should be available.

More interesting question is what should regular users see from execution of
their solution. Simple answer is of course that they should not see anything
which is partly true. Outputs from their programs can be anything and users can
somehow analyze inputs or even redirect them to output. So outputs from
execution should not be visible at all or under very special circumstances. But
that is not so straightforward for compilation or other kinds of initiation,
where it really depends on the particular case. Generally it is quite harmless
to display user some kind of compilation error which can help a lot during
troubleshooting. Of course again this kind of functionality should be
configurable by supervisors and disabled by default. There is also the last kind
of tasks which can output some information which is evaluation tasks. Output of
these tasks is somehow important to whole system and again can contain some
information about inputs or reference outputs. So outputs of evaluation tasks
should not be visible to regular users too.

The overall concept of grading solutions was presented earlier. To briefly
remind that, backend returns only exact measured values (used time and memory,
return code of the judging task, ...) and on top of that one value is computed.
The way of this computation can be very different across supervisors, so it has
to be easily extendable. The best way is to provide interface, which can be
implemented and any sort of magic can return the final value.

We found out several computational possibilities. There is basic arithmetic,
weighted arithmetic, geometric and harmonic mean of results of each test (the
result is logical value succeeded/failed, optionally with weight), some kind of
interpolation of used amount of time for each test, the same with used memory
amount and surely many others. To keep the project simple, we decided to design
appropriate interface and implement only weighted arithmetic mean computation,
which is used in about 90% of all assignments. Of course, different scheme can
be chosen for every assignment and also can be configured -- for example
specifying test weights for implemented weighted arithmetic mean. Advanced ways
of computation can be implemented on demand when there is a real demand for
them.

To avoid assigning points for insufficient solutions (like only printing "File
error" which is the valid answer in two tests), a minimal point threshold can be
specified. It the solution is to get less points than specified, it will get
zero points instead. This functionality can be embedded into grading computation
algoritm itself, but it would have to be present in each implementation
separately, which is a bit ugly. So, this feature is separated from point
computation.

Automatic grading cannot reflect all aspects of submitted code. For example,
structuring the code, number and quality of comments and so on. To allow
supervisors bring these manually checked things into grading, there is a concept
of bonus points. They can be positive or negative. Generally the solution with
the most assigned points is marked for grading that particular assignment.
However, if supervisor is not satisfied with student solution (really bad code,
cheating, ...) he/she assigns the student negative bonus points. To prevent
overriding this decision by system choosing another solution with more points or
even student submitting the same code again which evaluates to more points,
supervisor can mark a particular solution as marked and used for grading instead
of solution with the most points.

### Persistence

Previous parts of analysis show that the system has to keep some state. This
could be user settings, group membership, evaluated assignments and so on. The
data have to be kept across restart, so persistence is important decision
factor. There are several ways how to save structured data:

- plain files
- NoSQL database
- relational database

Another important factor is amount and size of stored data. Our guess is about
1000 users, 100 exercises, 200 assignments per year and 400000 unique solutions
per year. The data are mostly structured and there are a lot of them with the
same format. For example, there is a thousand of users and each one has the same
values -- name, email, age, etc. These kind of data are relatively small, name
and email are short strings, age is an integer. Considering this, relational
databases or formatted plain files (CSV for example) fits best for them.
However, the data often have to support find operation, so they have to be
sorted and allow random access for resolving cross references. Also, addition a
deletion of entries should take reasonable time (at most logaritmic time
complexity to number of saved values). This practically excludes plain files, so
relational database is used instead.

On the other hand, there are some data with no such great structure and much
larger size. These can be evaluation logs, sample input files for exercises or
submitted sources by students. Saving this kind of data into relational database
is not suitable, but it is better to keep them as ordinary files or store them
into some kind of NoSQL database. Since they are already files and does not need
to be backed up in multiple copies, it is easier to keep them as ordinary files
in filesystem. Also, this solution is more lightweight and does not require
additional dependencies on third-party software. File can be identified using
its filesystem path or unique index stored as value in relational database. Both
approaches are equally good, final decision depends on actual case.


## Structure of the project

There are numerous ways how to divide some sort of system into separated
services, from one single component to many and many single-purpose components.
Having only one big service is not feasible, not scalable enough and mainly it
would be one big blob of code which somehow works and is very complex, so this
is not the way. The quite opposite, having a lot of single-purpose components is
also somehow impractical. It is scalable by default and all services would have
quite simple code but on the other hand communication requirements for such
solution would be insane. So there has to be chosen approach which is somehow in
the middle, that means services have to communicate in manner which will not
bring network down, code basis should be reasonable and the whole system has to
be scalable enough. With this being said there can be discussion over particular
division for ReCodEx system.

The ReCodEx project is divided into two logical parts – the *backend* and the
*frontend* – which interact which each other and which cover the whole area of
code examination. Both of these logical parts are independent of each other in
the sense of being installed on separate machines at different locations and
that one of the parts can be replaced with a different implementation and as
long as the communication protocols are preserved, the system will continue
working as expected.

*Backend* is the part which is responsible solely for the process of evaluation
a solution of an exercise. Each evaluation of a solution is referred to as a
*job*. For each job, the system expects a configuration document of the job,
supplementary files for the exercise (e.g., test inputs, expected outputs,
predefined header files), and the solution of the exercise (typically source
codes created by a student). There might be some specific requirements for the
job, such as a specific runtime environment, specific version of a compiler or
the job must be evaluated on a processor with a specific number of cores. The
backend infrastructure decides whether it will accept a job or decline it based
on the specified requirements. In case it accepts the job, it will be placed in
a queue and it will be processed as soon as possible. The backend publishes the
progress of processing of the queued jobs and the results of the evaluations can
be queried after the job processing is finished.  The backend produces a log of
the evaluation and scores the solution based on the job configuration document.

From the scalable point of view there are two necessary components, the one
which will execute jobs and component which will distribute jobs to the
instances of the first one. This ensures scalability in manner of parallel
execution of numerous jobs which is exactly what is needed. Implementation of
these services are called **broker** and **worker**, first one handles
distribution, latter execution. These components should be enough to fulfill all
above said, but for the sake of simplicity and better communication gateways
with frontend two other components were added, **fileserver** and **monitor**.
Fileserver is simple component whose purpose is to store files which are
exchanged between frontend and backend. Monitor is also quite simple service
which is able to serve job progress state from worker to web application. These
two additional services are on the edge of frontend and backend (like gateways)
but logically they are more connected with backend, so it is considered they
belong there.

*Frontend* on the other hand is responsible for the communication with the users
and provides them a convenient access to the backend infrastructure. The
frontend manages user accounts and gathers them into units called groups. There
is a database of exercises which can be assigned to the groups and the users of
these groups can submit their solutions for these assignments. The frontend will
initiate evaluation of these solutions by the backend and it will store the
results afterwards. The results will be visible to authorized users and the
results will be awarded with points according to the score given by the backend
in the evaluation process. The supervisors of the groups can edit the parameters
of the assignments, review the solutions and the evaluations in detail and award
the solutions with bonus points (both positive and negative) and discuss about
the solution with the author of the solution. Some of the users can be entitled
to create new exercises and extend the database of exercises which can be
assigned to the groups later on.

There are two main purposes of frontend -- holding the state of whole system
(database of users, exercises, solutions, points, etc.) and presenting the state
to users through some kind of an user interface (e.g., a web application, mobile
application, or a command-line tool). According to contemporary trends in
development of frontend parts of applications, we decided to split the frontend
in two logical parts -- a server side and a client side. The server side is
responsible for managing the state and the client side gives instructions to the
server side based on the inputs from the user. This decoupling gives us the
ability to create multiple client side tools which may address different needs
of the users.

The frontend developed as part of this project is a web application created with
the needs of the Faculty of Mathematics and Physics of the Charles university in
Prague in mind. The users are the students and their teachers, groups correspond
to the different courses, the teachers are the supervisors of these groups. We
believe that this model is applicable to the needs of other universities,
schools, and IT companies, which can use the same system for their needs. It is
also possible to develop their own frontend with their own user management
system for their specific needs and use the possibilities of the backend without
any changes, as was mentioned in the previous paragraphs.

One possible configuration of ReCodEx system is illustrated on following
picture, where there is one shared backend with three workers and two separate
instances of whole frontend. This configuration may be suitable for MFF UK --
basic programming course and KSP competition. But maybe even sharing web API and
fileserver with only custom instances of client (web app or own implementation)
is more likely to be used. Note, that connections between components are not
fully accurate.

![Overall architecture](https://github.com/ReCodEx/wiki/blob/master/images/Overall_Architecture.png)

In the latter parts of the documentation, both of the backend and frontend parts
will be introduced separately and covered in more detail. The communication
protocol between these two logical parts will be described as well.


## Implementation analysis

When developing a project like ReCodEx there has to be some discussion over
implementation details and how to solve some particular problems properly.
This discussion is a never ending story which is done through the whole
development process. Some of the most important implementation problems or
interesting observations will be discussed in this chapter.

### General communication

Overall design of the project is discussed above. There are bunch of components
with their own responsibility. Important thing to design is communication of
these components. All we can count with is that they are connected by network.

To choose a suitable protocol, there are some additional requirements that
should be met:

- reliability -- if a message is sent between components, the protocol has to
  ensure that it is received by target component
- working over IP protocol
- multi-platform and multi-language usage

TCP/IP protocol meets these conditions, however it is quite low level and
working with it usually requires working with platform dependent non-object API.
Often way to reflect these reproaches is to use some framework which provides
better abstraction and more suitable API. We decided to go this way, so the
following options are considered:

- CORBA -- Corba is a well known framework for remote object invocation. There
  are multiple implementations for almost every known programming language. It
  fits nicely into object oriented programming environment.
- RabbitMQ -- RabbitMQ is a messaging framework written in Erlang. It has
  bindings to huge number of languages and large community. Also, it is capable
  of routing requests, which could be handy feature for job loadbalancing.
- ZeroMQ -- ZeroMQ is another messaging framework, but instead of creating
  separate service this is a small library which can be embedded into own
  projects. It is written in C++ with huge number of bindings. 

We like CORBA, but our system should be more loosely-coupled, so (asynchronous)
messaging is better approach in our minds. RabbitMQ seems nice with great
advantage of routing capability, but it is quite heavy service written in
language no one from the team knows, so we do not like it much. ZeroMQ is the
best option for us. However, all of the three options would have been possible
to use.

Frontend communication follows the choice, that ReCodEx should be primary a web
application. The communication protocol has to reflect client-server
architecture. There are several options:

- *TCP sockets* -- TCP sockets give a reliable means of a full-duplex
  communication. All major operating systems support this protocol and there are
  libraries which simplify the implementation.  On the other side, it is not
  possible to initiate a TCP socket from a web browser.
- *WebSockets* -- The WebSocket standard is built on top of TCP. It enables a
  web browser to connect to a server over a TCP socket. WebSockets are
  implemented in recent versions of all modern web browsers and there are
  libraries for several programming languages like Python or JavaScript (running
  in Node.js).  Encryption of the communication over a WebSocket is supported as
  a standard.
- *HTTP protocol* -- The HTTP protocol is a state-less protocol implemented on
  top of the TCP protocol.  The communication between the client and server
  consists of a requests sent by the client and responses to these requests sent
  back by the sever. The client can send as many requests as needed and it may
  ignore the responses from the server, but the server must respond only to the
  requests of the client and it cannot initiate communication on its own.
  End-to-end encryption can be achieved easily using SSL (HTTPS).

We chose the HTTP(S) protocol because of the simple implementation in all sorts
of operating systems and runtime environments on both the client and the server
side.

The API of the server should expose basic CRUD (Create, Read, Update, Delete)
operations. There are some options on what kind of messages to send over the
HTTP:

- SOAP -- a protocol for exchanging XML messages. It is very robust and complex.
- REST -- is a stateless architecture style, not a protocol or a technology. It
  relies on HTTP (but not necessarily) and its method verbs (e.g., GET, POST,
  PUT, DELETE). It can fully implement the CRUD operations.

Even though there are some other technologies we chose the REST style over the
HTTP protocol. It is widely used, there are many tools available for development
and testing, and it is understood by programmers so it should be easy for a new
developer with some experience in client-side applications to get to know with
the ReCodEx API and develop a client application.

To sum up, chosen ways of communication inside the ReCodEx system are captured
in the following image. Red connections are through ZeroMQ sockets, blue are
through WebSockets and green are through HTTP(S).

![Communication schema](https://github.com/ReCodEx/wiki/raw/master/images/Backend_Connections.png)

### Broker

The broker is responsible for keeping track of available workers and
distributing jobs that it receives from the frontend between them. 

#### Worker management

It is intended for the broker to be a fixed part of the backend infrastructure
to which workers connect at will. Thanks to this design, workers can be added
and removed when necessary (and possibly in an automated fashion), without
changing the configuration of the broker. An alternative solution would be
configuring a list of workers before startup, thus making them passive in the
communication (in the sense that they just wait for incoming jobs instead of
connecting to the broker). However, this approach comes with a notable
administration overhead -- in addition to starting a worker, the administrator
would have to update the worker list.

Worker management must also take into account the possibility of worker
disconnection, either because of a network or software failure (or termination).
A common way to detect such events in distributed systems is to periodically
send short messages to other nodes and expect a response. When these messages
stop arriving, we presume that the other node encountered a failure. Both the
broker and workers can be made responsible for initiating these exchanges and it
seems that there are no differences stemming from this choice. We decided that
the workers will be the active party that initiates the exchange.

#### Scheduling

Jobs should be scheduled in a way that ensures that they will be processed
without unnecessary waiting. This depends on the fairness of the scheduling
algorithm (no worker machine should be overloaded).

The design of such scheduling algorithm is complicated by the requirements on
the diversity of workers -- they can differ in operating systems, available
software, computing power and many other aspects. 

We decided to keep the details of connected workers hidden from the frontend,
which should lead to a better separation of responsibilities and flexibility.
Therefore, the frontend needs a way of communicating its requirements on the
machine that processes a job without knowing anything about the available
workers. A key-value structure is suitable for representing such requirements.

With respect to these constraints, and because the analysis and design of a more
sophisticated solution was declared out of scope of our project assignment, a
rather simple scheduling algorithm was chosen. The broker shall maintain a queue
of available workers. When assigning a job, it traverses this queue and chooses
the first machine that matches the requirements of the job. This machine is then
moved to the end of the queue. 

Presented algorithm results in a simple round-robin load balancing strategy,
which should be sufficient for small-scale deployments (such as a single
university). However, with a large amount of jobs, some workers will easily
become overloaded. The implementation must allow for a simple replacement of the
load balancing strategy so that this problem can be solved in the near future.

#### Forwarding jobs

Information about a job can be divided in two disjoint parts -- what the worker
needs to know to process it and what the broker needs to forward it to the
correct worker. It remains to be decided how this information will be
transferred to its destination. 

It is technically possible to transfer all the data required by the worker at
once through the broker. This package could contain submitted files, test
data, requirements on the worker, etc. A drawback of this solution is that
both submitted files and test data can be rather large. Furthermore, it is
likely that test data would be transferred many times.

Because of these facts, we decided to store data required by the worker using a
shared storage space and only send a link to this data through the broker. This
approach leads to a more efficient network and resource utilization (the broker
doesn't have to process data that it doesn't need), but also makes the job
submission flow more complicated.

#### Further requirements

The broker can be viewed as a central point of the backend. While it has only
two primary, closely related responsibilities, other requirements have arisen
(forwarding messages about job evaluation progress back to the frontend) and
will arise in the future. To facilitate such requirements, its architecture
should allow simply adding new communication flows. It should also be as
asynchronous as possible to enable efficient communication with external
services, for example via HTTP.

### Worker

Worker is component which is supposed to execute incoming jobs from broker. As
such worker should work and support wide range of different infrastructures and
maybe even platforms/operating systems. Support of at least two main operating
systems is desirable and should be implemented. Worker as a service does not
have to be much complicated, but a bit of complex behaviour is needed. Mentioned
complexity is almost exclusively concerned about robust communication with
broker which has to be regularly checked. Ping mechanism is usually used for
this in all kind of projects. This means that worker should be able to send ping
messages even during execution. So worker has to be divided into two separate
parts, the one which will handle communication with broker and the another which
will execute jobs. The easiest solution is to have these parts in separate
threads which somehow tightly communicates with each other. For inter process
communication there can be used numerous technologies, from shared memory to
condition variables or some kind of in-process messages. Already used library
ZeroMQ is possible to provide in-process messages working on the same principles
as network communication which is quite handy and solves problems with threads
synchronization and such.

At this point we have worker with two internal parts listening one and execution
one. Implementation of first one is quite straightforward and clear. So lets
discuss what should be happening in execution subsystem. Jobs as work units can
quite vary and do completely different things, that means configuration and
worker has to be prepared for this kind of generality. Configuration and its
solution was already discussed above, implementation in worker is then quite
also quite straightforward. Worker has internal structures to which loads and
which stores metadata given in configuration. Whole job is mapped to job
metadata structure and tasks are mapped to either external ones or internal ones
(internal commands has to be defined within worker), both are different whether
they are executed in sandbox or as internal worker commands.

Another division of tasks is by task-type field in configuration. This field can
have four values: initiation, execution, evaluation and inner. All was discussed
and described above in configuration analysis. What is important to worker is
how to behave if execution of task with some particular type fails. There are
two possible situations execution fails due to bad user solution or due to some
internal error. If execution fails on internal error solution cannot be declared
overly as failed. User should not be punished for bad configuration or some
network error. This is where task types are useful. Generally initiation,
execution and evaluation are tasks which are somehow executing code which was
given by users who submitted solution of exercise. If this kinds of tasks fail
it is probably connected with bad user solution and can be evaluated. But if
some inner task fails solution should be re-executed, in best case scenario on
different worker. That is why if inner task fails it is sent back to broker
which will reassign job to another worker. More on this subject should be
discussed in broker assigning algorithms section.

There is also question about working directory or directories of job, which
directories should be used and what for. There is one simple answer on this
every job will have only one specified directory which will contain every file
with which worker will work in the scope of whole job execution. This is of
course nonsense there has to be some logical division. The least which must be
done are two folders one for internal temporary files and second one for
evaluation. The directory for temporary files is enough to comprehend all kind
of internal work with filesystem but only one directory for whole evaluation is
somehow not enough. Users solutions are downloaded in form of zip archives so
why these should be present during execution or why the results and files which
should be uploaded back to fileserver should be cherry picked from the one big
directory? The answer is of course another logical division into subfolders. The
solution which was chosen at the end is to have folders for downloaded archive,
decompressed solution, evaluation directory in which user solution is executed
and then folders for temporary files and for results and generally files which
should be uploaded back to fileserver with solution results. Of course there has
to be hierarchy which separate folders from different workers on the same
machines. That is why paths to directories are in format:
`${DEFAULT}/${FOLDER}/${WORKER_ID}/${JOB_ID}` where default means default
working directory of whole worker, folder is particular directory for some
purpose (archives, evaluation, ...). Mentioned division of job directories
proved to be flexible and detailed enough, everything is in logical units and
where it is supposed to be which means that searching through this system should
be easy. In addition if solutions of users have access only to evaluation
directory then they do not have access to unnecessary files which is better for
overall security of whole ReCodEx.

As we discovered above worker has job directories but users who are writing and
managing job configurations do not know where they are (on some particular
worker) and how they can be accessed and written into configuration. For this
kind of task we have to introduce some kind of marks or signs which will
represent particular folders. Marks or signs can have form of some kind of
special strings which can be called variables. These variables then can be used
everywhere where filesystem paths are used within configuration file. This will
solve problem with specific worker environment and specific hierarchy of
directories. Final form of variables is `${...}` where triple dot is textual
description. This format was used because of special dollar sign character which
cannot be used within filesystem path, braces are there only to border textual
description of variable.

#### Evaluation

After successful arrival of job, worker has to prepare new execution
environment, then solution archive has to be downloaded from fileserver and
extracted. Job configuration is located within these files and loaded into
internal structures and executed. After that results are uploaded back to
fileserver. These steps are the basic ones which are really necessary for whole
execution and have to be executed in this precise order.

Interesting problem is with supplementary files (inputs, sample outputs). There
are two approaches which can be observed. Supplementary files can be downloaded
either on the start of the execution or during execution. If the files are
downloaded at the beginning execution does not really started at this point and
if there are problems with network worker find it right away and can abort
execution without executing single task. Slight problems can arise if some of
the files needs to have same name (e.g. solution assumes that input is
`input.txt`), in this scenario downloaded files cannot be renamed at the
beginning but during execution which is somehow impractical and not easily
observed. Second solution of this problem when files are downloaded on the fly
has quite opposite problem, if there are problems with network worker will find
it during execution when for instance almost whole execution is done, this is
also not ideal solution if we care about burnt hardware resources. On the other
hand using this approach users have quite advanced control of execution flow and
know what files exactly are available during execution which is from users
perspective probably more appealing then the first solution. Based on that
downloading of supplementary files using 'fetch' tasks during execution was
chosen and implemented.

#### Caching mechanism

Worker can use caching mechanism based on files from fileserver under one
condition, provided files has to have unique name. If uniqueness is fulfilled
then precious bandwidth can be saved using cache. This means there has to be
system which can download file, store it in cache and after some time of
inactivity delete it. Because there can be multiple worker instances on some
particular server it is not efficient to have this system in every worker on its
own. So it is feasible to have this feature somehow shared among all workers on
the same machine. Solution may be again having separate service connected
through network with workers which would provide such functionality but this
would mean component with another communication for the purpose where it is not
exactly needed. But mainly it would be single-failure component if it would stop
working it is quite problem. So there was chosen another solution which assumes
worker has access to specified cache folder, to this folder worker can download
supplementary files and copy them from here. This means every worker has the
possibility to maintain downloads to cache, but what is worker not able to
properly do is deletion of unused files after some time. For that single-purpose
component is introduced which is called 'cleaner'. It is simple script executed
within cron which is able to delete files which were unused for some time.
Together with worker fetching feature cleaner completes machine specific caching
system.

Cleaner as mentioned is simple script which is executed regularly as cron job.
If there is caching system like it was introduced in paragraph above there are
little possibilities how cleaner should be implemented. On various filesystems
there is usually support for two  particular timestamps, `last access time` and
`last modification time`. Files in cache are once downloaded and then just
copied, this means that last modification time is set only once on creation of
file and last access time should be set every time on copy. This imply last
access time is what is needed here. But last modification time is widely used by
operating systems, on the other hand last access time is not by default. More on
this subject can be found
[here](https://en.wikipedia.org/wiki/Stat_%28system_call%29#Criticism_of_atime).
For proper cleaner functionality filesystem which is used by worker for caching
has to have last access time for files enabled.

Having cleaner as separated component and caching itself handled in worker is
kind of blurry and is not clearly observable that it works without any race
conditions. The goal here is not to have system without races but to have system
which can recover from them. Implementation of caching system is based upon
atomic operations of underlying filesystem. Follows description of one possible
robust implementation. First start with worker implementation:

- worker discovers fetch task which should download supplementary file
- worker takes name of file and tries to copy it from cache folder to its
  working folder
	- if successful then last access time should be rewritten (by filesystem
	  itself) and whole operation is done
	- if not successful then file has to be downloaded
		- file is downloaded from fileserver to working folder
		- downloaded file is then copied to cache

Previous implementation is only within worker, cleaner can anytime intervene and
delete files. Implementation in cleaner follows:

- cleaner on its start stores current reference timestamp which will be used for
  comparison and load configuration values of caching folder and maximal file
  age
- there is a loop going through all files and even directories in specified
  cache folder
	- last access time of file or folder is detected
	- last access time is subtracted from reference timestamp into
	  difference
	- difference is compared against specified maximal file age, if
	  difference is greater, file or folder is deleted

Previous description implies that there is gap between detection of last access
time and deleting file within cleaner. In the gap there can be worker which will
access file and the file is anyway deleted but this is fine, file is deleted but
worker has it copied. Another problem can be with two workers downloading the
same file, but this is also not a problem file is firstly downloaded to working
folder and after that copied to cache. And even if something else unexpectedly
fails and because of that fetch task will fail during execution even that should
be fine. Because fetch tasks should have 'inner' task type which implies that
fail in this task will stop all execution and job will be reassigned to another
worker. It should be like the last salvation in case everything else goes wrong.

#### Sandboxing

There are numerous ways how to approach sandboxing on different platforms,
describing all possible approaches is out of scope of this document. Instead of
that have a look at some of the features which are certainly needed for ReCodEx
and propose some particular sandboxes implementations on Linux or Windows.

General purpose of sandbox is safely execute software in any form, from scripts
to binaries. Various sandboxes differ in how safely are they and what limiting
features they have. Ideal situation is that sandbox will have numerous options
and corresponding features which will allow administrators to setup environment
as they like and which will not allow user programs to somehow damage executing
machine in any way possible.

For ReCodEx and its evaluation there is need for at least these features:
execution time and memory limitation, disk operations limit, disk accessibility
restrictions and network restrictions. All these features if combined and
implemented well are giving pretty safe sandbox which can be used for all kinds
of users solutions and should be able to restrict and stop any standard way of
attacks or errors.

Linux systems have quite extent support of sandboxing in kernel, there were
introduced and implemented kernel namespaces and cgroups which combined can
limit hardware resources (cpu, memory) and separate executing program into its
own namespace (pid, network). These two features comply sandbox requirement for
ReCodEx so there were two options, either find existing solution or implement
new one. Luckily existing solution was found and its name is **isolate**.
Isolate does not use all possible kernel features but only subset which is still
enough to be used by ReCodEx.

The opposite situation is in Windows world, there is limited support in its
kernel which makes sandboxing a bit trickier. Windows kernel only has ways how
to restrict privileges of a process through restriction of internal access
tokens. Monitoring of hardware resources is not possible but used resources can
be obtained through newly created job objects. But find sandbox which can do all
things needed for ReCodEx seems to be impossible. There are numerous sandboxes
for Windows but they all are focused on different things in a lot of cases they
serves as safe environment for malicious programs, viruses in particular. Or
they are designed as a separate filesystem namespace for installing a lot of
temporarily used programs. From all these we can mention Sandboxie, Comodo
Internet Security, Cuckoo sandbox and many others. None of these is fitted as
sandbox solution for ReCodEx. With this being said we can safely state that
designing and implementing new general sandbox for Windows is out of scope of
this project.

New general sandbox for Windows is out of business but what about more
specialized solution used for instance only for C#. CLR as a virtual machine and
runtime environment has a pretty good security support for restrictions and
separation which is also transferred to C#. This makes it quite easy to
implement simple sandbox within C# but surprisingly there cannot be found some
well known general purpose implementations. As said in previous paragraph
implementing our own solution is out of scope of project there is simple not
enough time. But C# sandbox is quite good topic for another project for example
term project for C# course so it might be written and integrated in future.

### Fileserver

The fileserver provides access to a shared storage space that contains files
submitted by students, supplementary files such as test inputs and outputs and
results of evaluation. In other words, it acts as an intermediate node for data
passed between the frontend and the backend. This functionality can be easily
separated from the rest of the backend features, which led to designing the
fileserver as a standalone component. Such design helps encapsulate the details
of how the files are stored (e.g. on a file system, in a database or using a
cloud storage service), while also making it possible to share the storage
between multiple ReCodEx frontends.

For early releases of the system, we chose to store all files on the file system
-- it is the least complicated solution (in terms of implementation complexity)
and the storage backend can be rather easily migrated to a different technology.

One of the facts we learned from CodEx is that many exercises share test input
and output files, and also that these files can be rather large (hundreds of
megabytes). A direct consequence of this is that we cannot add these files to
submission archives that are to be downloaded by workers -- the combined size of
the archives would quickly exceed gigabytes, which is impractical. Another
conclusion we made is that a way to deal with duplicate files must be
introduced.

A simple solution to this problem is storing supplementary files under the
hashes of their content. This ensures that every file is stored only once. On
the other hand, it makes it more difficult to understand what the content of a
file is at a glance, which might prove problematic for the administrator.

A notable part of the fileserver's work is done by a web server (e.g. listening
to HTTP requests and caching recently accessed files in memory for faster
access). What remains to be implemented is handling requests that upload files
-- student submissions should be stored in archives to facilitate simple
downloading and supplementary exercise files need to be stored under their
hashes.

We decided to use Python and the Flask web framework. This combination makes it
possible to express the logic in ~100 SLOC and also provides means to run the
fileserver as a standalone service (without a web server), which is useful for
development.

### Monitor

Users want to view real time evaluation progress of their solution. It can be
easily done with established double-sided connection stream, but it is hard to
achieve with web technologies. HTTP protocol works differently on separate
requests basis with no long term connection. However, there is widely used
technology to solve this problem, WebSocket protocol.

Working with WebSocket protocol from the backend is possible, but not ideal from
design point of view. Backend should be hidden from public internet to minimize
surface for possible attacks. With this in mind, there are two possible options:

- send progress messages through API
- make separate component for progress messages

Each of the two possibilities has some pros and cons. The first one is good
because there is no additional component and API is already publicly visible. On
the other side, working with WebSocket protocol from PHP is not much pleasant
(but it is possible) and embedding this functionality into API is not
extendable. The second approach is better for future changing the protocol or
implementing extensions like caching of messages. Also, the progress feature is
considered only optional, because there may be clients for which this feature is
useless. Major drawback of separate component is another part, which needs to
be publicly exposed.

We decided to make a separate component, mainly because it is smaller component
with only one role, better maintainability and optional demands for progress
callback.

There are several possibilities how to write the component. Notably, considered
options were already used languages C++, PHP, JavaScript and Python. At the end,
the Python language was chosen for its simplicity, great support for all used
technologies and also there are free Python developers in out team. Then,
responsibility of this component is determined. Concept of message flow is on
following picture.

![Message flow inside montior](https://raw.githubusercontent.com/ReCodEx/wiki/master/images/Monitor_arch.png)

The message channel inputing the monitor uses ZeroMQ as main message framework
used by backend. This decision keeps rest of backend aware of used
communication protocol and related libraries. Output channel is WebSocket as a
protocol for sending messages to web browsers. In Python, there are several
WebSocket libraries. The most popular one is `websockets` in cooperation with
`asyncio`. This combination is easy to use and well documented, so it is used in
monitor component too. For ZeroMQ, there is `zmq` library with binding to
framework core in C++.

Incoming messages are cached for short period of time. Early testing shows,
that backend can start sending progress messages sooner than client connects to
the monitor. To solve this, messages for each job are hold 5 minutes after
reception of last message. The client gets all already received messages at time
of connection with no message loss.

### API server

The API server must handle HTTP requests and manage the state of the application
in some kind of a database.  It must also be able to communicate with the
backend over ZeroMQ.

We considered several technologies which could be used:

- PHP + Apache -- one of the most widely used technologies for creating web
  servers. It is a suitable technology for this kind of a project. It has all
  the features we need when some additional extensions are installed (to support
  LDAP or ZeroMQ).
- Ruby on Rails, Python (Django), etc. -- popular web technologies that appeared
  in the last decade. Both support ZeroMQ and LDAP via extensions and have large
  developer communities.
- ASP.NET (C#), JSP (Java) -- these technologies are very robust and are used to
  create server technologies in many big enterprises. Both can run on Windows
  and Linux servers (ASP.NET using the .NET Core).
- JavaScript (Node.js) -- it is a quite new technology and it is being used to
  create REST APIs lately.  Applications running on Node.js are quite performant
  and the number of open-source libraries available on the Internet is very
  huge.

We chose PHP and Apache mainly because we were familiar with these technologies
and we were able to develop all the features we needed without learning to use a
new technology. Since the number of features was quite high and needed to meet a
strict deadline. This does not mean that we would find all the other
technologies superior to PHP in all other aspects - PHP 7 is a mature language
with a huge community and a wide range of tools, libraries, and frameworks.

We decided to use an ORM framework to manage the database, namely the widely
used PHP ORM Doctrine 2. Using an ORM tool means we do not have to write SQL
queries by hand. Instead, we work with persistent objects, which provides a
higher level of abstraction. Doctrine also has a robust database abstraction
layer so the database engine is not very important and it can be changed without
any need for changing the code. MariaDB was chosen as the storage backend.

To speed up the development process of the PHP server application we decided to
use a web framework. After evaluating and trying several frameworks, such as
Lumen, Laravel, and Symfony, we ended up using Nette. This framework is very
common in Czech Republic -- its lead developer is a well-known Czech programmer
David Grudl -- and we were already familiar with the patterns used in this
framework, such as dependency injection, authentication, routing. These concepts
are useful even when developing a REST application, which might be a surprise
considering that Nette focuses on "traditional" web applications. There is also
a Nette extension which makes integartion of Doctrine 2 very straightforward.

#### Request handling

@todo Nette Router, how we exploit presenters to act as api endpoints

#### Authentication

Because Nette is focused on building web applications that render a new
page for (almost) every request, it uses PHP sessions (based on cookies) for
authentication. This method is unsuitable for REST APIs where clients do not
typically store cookies. However, it is common that RESTful services provide
access tokens that are then sent with every request by the client.

JWT (JSON web tokens), an open standard for access tokens, was chosen for our
authentication implementation. Support libraries exist for all major languages
used in web developments that facilitate straightforward usage. The tokens use
asymmetric cryptography for signing, which provides a satisfactory level of
security.

To implement JWT in Nette, we have to implement some of its security-related
interfaces such as IAuthenticator and IUserStorage, which is rather easy
thanks to the simple authentication flow. Replacing these services in a Nette
application is also straightforward, thanks to its dependency injection
container implementation.

#### Solution loading

When a solution evaluation on backend is finished, results are saved to
fileserver and API is notified by broker about this state. Then some further
steps needs to be done before the results can be presented to users. For
example, these steps are parsing of the results, computating score or saving
structured data into database. There are two main possibilities of loading:

- immediately
- on demand

They are almost equal, none of them provides any kind of big advantage. Loading
solutions immediately is better, because fetching results from client for the
first time can be a bit faster. On the other hand, loading them on demand when
they are requested for the first time can save some resources when the solution
results are not important and no one is interested in them.

From this choice, we picked up lazy loading when the results are requested.
However, concept of asynchronous jobs is then introduced. This type of job is
useful for batch submitting of jobs, for example rerunning jobs which failed on
worker hardware issue. These jobs are typically submitted by different user than
author (administator for example), so original authors should be notified. In
this case it is more reasonable to load the results immediately and optionally
send them with the notification. Exactly this is also done, special asynchronous
jobs are loaded immediately with email notification to the original job author.

From a short time distance it seems that immediate loading of all jobs could
simplify loading code and has no major drawbacks. In the next version of ReCodEx
we will rethink this decission.

@todo: what files are stored in api, why there are duplicates among api and fileserver

@todo permission handling, roles, etc.

#### Backend management

Considering the fact that we have backend as a separate component which has no
clue about administrators and uses only logging as some kind of failure
reporting. It can be handy to provide this functionality to backend from
frontend which manages users. The simplest solution would be again to have
separate component with some sort of public interface. It can be for example
REST or some other communication which backend can handle. Functionality of this
kind of component is then quite easy. When request for report arrives from
backend then type is inferred and if it is error which deserves attention of
administrator then email is sent to him/her. There can also be errors which are
not that important, was somehow solved by backend itself or are only
informative, these do not have to be reported by email but only stored in
persistent database for further consideration. On top of that separate component
can be internal and not exposed to outside network. Disadvantage is that
database layer which is used in some particular API instance cannot be used here
because multiple instances of API can use one backend.

Another solution which was at the end implemented is to integrate backend
failure reporting feature to API. Problem with previous one is that if job
execution fails backend has to report this error to some particular API server
from which request for evaluation came. This information is essential and has to
be stored there and not in some general component and general error database.
Obviously if there are multiple API servers connected to one backend there has
to be some API server configured in backend as the main one which receives
reports about general backend errors which are not connected to jobs. This
solution was chosen because as stated we have to implement job error reporting
in API and having separate component only for general errors is not feasible. In
the end error reporting should be available under different route which is
secured by basic HTTP authentication, because basic authentication is easy
enough to implement in low-level backend components. That also means this
feature is visible and can be exploited but from our points of view it seems as
appropriate compromise in simplicity.

@todo: where is stored which workers can be used by supervisors and which runtimes are available, describe possibilities and why is not implemented automatic solution


### Web-app

@todo: what technologies can be used on client frontend side, why react was used

@todo: please think about more stuff about api and web-app... thanks ;-)



# The Backend

The backend is the part which is hidden to the user and which has only
one purpose: evaluate user’s solutions of their assignments.

@todo: describe the configuration inputs of the Backend

@todo: describe the outputs of the Backend

@todo: describe how the backend receives the inputs and how it
communicates the results

## Components

Whole backend is not just one service/component, it is quite complex system on its own.

@todo: describe the inner parts of the Backend (and refer to the Wiki
for the technical description of the components)

### Broker

@todo: gets stuff done, single point of failure and center point of ReCodEx universe

### Fileserver

@todo: stores particular data from frontend and backend, hashing, HTTP API

### Worker

@todo: describe a bit of internal structure in general

@todo: describe how jobs are generally executed

### Monitor

@todo: not necessary component which can be omitted, proxy-like service

## Backend internal communication

@todo: internal backend communication, what communicates with what and why

The Frontend
============

The frontend is the part which is visible to the user of ReCodEx and
which holds the state of the system – the user accounts, their roles in
the system, the database of exercises, the assignments of these
exercises to groups of users (i.e., students), and the solutions and
evaluations of them.

Frontend is split into three parts:

-   the server-side REST API (“API”) which holds the business logic and
    keeps the state of the system consistent

-   the relational database (“DB”) which persists the state of the
    system

-   the client side application (“client”) which simplifies access to
    the API for the common users

The centerpiece of this architecture is the API. This component receives
requests from the users and from the Backend, validates them and
modifies the state of the system and persists this modified state in the
DB.

We have created a web application which can communicate with the API
server and present the information received from the server to the user
in a convenient way. The client can be though any application, which can
send HTTP requests and receive the HTTP responses. Users can use general
applications like [cURL](https://github.com/curl/curl/),
[Postman](https://www.getpostman.com/), or create their own specific
client for ReCodEx API.

Frontend capabilities
---------------------

@todo: describe what the frontend is capable of and how it really works,
what are the limitations and how it can be extended

Terminology
-----------

This project was created for the needs of a university and this fact is
reflected into the terminology used throughout the Frontend. A list of
important terms’ definitions follows to make the meaning unambiguous.

### User and user roles

*User* is a person who uses the application. User is granted access to
the application once he or she creates an account directly through the
API or the web application. There are several types of user accounts
depending on the set of permissions – a so called “role” – they have
been granted. Each user receives only the most basic set of permissions
after he or she creates an account and this role can be changed only by
the administrators of the service:

-   *Student* is the most basic role. Student can become member of a
    group and submit his solutions to his assignments.

-   *Supervisor* can be entitled to manage a group of students.
    Supervisor can assign exercises to the students who are members of
    his groups and review their solutions submitted to
    these assignments.

-   *Super-admin* is a user with unlimited rights. This user can perform
    any action in the system.

There are two implicit changes of roles:

-   Once a *student* is added to a group as its supervisor, his role is
    upgraded to a *supervisor* role.

-   Once a *supervisor* is removed from the lasts group where he is a
    supervisor then his role is downgraded to a *student* role.

These mechanisms do not prevent a single user being a supervisor of one
group and student of a different group as supervisors’ permissions are
superset of students’ permissions.

### Login

*Login* is a set of user’s credentials he must submit to verify he can
be allowed to access the system as a specific user. We distinguish two
types of logins: local and external.

-   *Local login* is user’s email address and a password he chooses
    during registration.

-   *External login* is a mapping of a user profile to an account of
    some authentication service (e.g., [CAS](https://ldap1.cuni.cz/)).

### Instance

*An instance* of ReCodEx is in fact just a set of groups and user
accounts. An instance should correspond to a real entity as a
university, a high-school, an IT company or an HR agency. This approach
enables the system to be shared by multiple independent organizations
without interfering with each other.

Usage of the system by the users of an instance can be limited by
possessing a valid license. It is up to the administrators of the system
to determine the conditions under which they will assign licenses to the
instances.

### Group

*Group* corresponds to a school class or some other unit which gathers
users who will be assigned the same set exercises. Each group can have
multiple supervisors who can manage the students and the list of
assignments.

Groups can form a tree hierarchy of arbitrary depth. This is inspired by the 
hierarchy of school classes belonging to the same subject over several school 
years. For example, there can be a top level group for a programming class that 
contains subgroups for every school year. These groups can then by divided into 
actual student groups with respect to lab attendance. Supervisors can create 
subgroups of their groups and further manage these subgroups.

### Exercise

*An exercise* consists of textual assignment of a task and a definition
of how a solution to this exercise should be processed and evaluated in
a specific runtime environment (i.e., how to compile a submitted source
code and how to test the correctness of the program). It is a template
which can be instantiated as an *assignment* by a supervisor of a group.

### Assignment

An assignment is an instance of an *exercise* assigned to a specific
*group*. An assignment can modify the text of the task assignment and it
has some additional information which is specific to the group (e.g., a
deadline, the number of points gained for a correct solution, additional
hints for the students in the assignment). The text of the assignment
can be edited and supervisors can translate the assignment into another
language.

### Solution

*A solution* is a set of files which a user submits to a given
*assignment*.

### Submission

*A submission* corresponds to a *solution* being evaluated by the
Backend. A single *solution* can be submitted repeatedly (e.g., when the
Backend encounters an error or when the supervisor changes the assignment).

### Evaluation

*An evaluation* is the processed report received from the Backend after
a *submission* is processed. Evaluation contains points given to the
user based on the quality of his solution measured by the Backend and
the settings of the assignment. Supervisors can review the evaluation
and add bonus points (both positive and negative) if the student
deserves some.

### Runtime environment

*A runtime environment* defines the used programming language or tools
which are needed to process and evaluate a solution. Examples of a
runtime environment can be:

- *Linux + GCC*
- *Linux + Mono*
- *Windows + .NET 4*
- *Bison + Yacc*

### Limits

A correct *solution* of an *assignment* has to pass all specified tests (mostly 
checks that it yields the correct output for various inputs) and typically must 
also be effective in some sense. The Backend measures the time and memory 
consumption of the solution while running. This consumption of resources can be 
*limited* and the solution will receive fewer points if it exceeds the given 
limits in some test cases defined by the *exercise*.

User management
---------------

@todo: roles and their rights, adding/removing different users, how the
role of a specific user changes

Instances and hierarchy of groups
---------------------------------

@todo: What is an instance, how to create one, what are the licenses and
how do they work. Why can the groups form hierarchies and what are the
benefits – what it means to be an admin of a group, hierarchy of roles
in the group hierarchy.

Exercises database
------------------

@todo: How the exercises are stored, accessed, who can edit what

### Creating a new exercise

@todo Localized assignments, default settings

### Runtime environments and hardware groups

@todo read this later and see if it still makes sense

ReCodEx is designed to utilize a rather diverse set of workers -- there can be 
differences in many aspects, such as the actual hardware running the worker 
(which impacts the results of measuring) or installed compilers, interpreters 
and other tools needed for evaluation. To address these two examples in 
particular, we assign runtime environments and hardware groups to exercises.

The purpose of runtime environments is to specify which tools (and often also 
operating system) are required to evaluate a solution of the exercise -- for 
example, a C# programming exercise can be evaluated on a Linux worker running 
Mono or a Windows worker with the .NET runtime. Such exercise would be assigned 
two runtime environments, `Linux+Mono` and `Windows+.NET` (the environment names 
are arbitrary strings configured by the administrator).

A hardware group is a set of workers that run on similar hardware (e.g. a 
particular quad-core processor model and a SSD hard drive). Workers are assigned 
to these groups by the administrator. If this is done correctly, performance 
measurements of a submission should yield the same results. Thanks to this fact, 
we can use the same resource limits on every worker in a hardware group. 
However, limits can differ between runtime environments -- formally speaking, 
limits are a function of three arguments: an assignment, a hardware group and a 
runtime environment.

### Reference solutions

@todo: how to add one, how to evaluate it

The task of determining appropriate resource limits for exercises is difficult 
to do correctly. To aid exercise authors and group supervisors, ReCodEx supports 
assigning reference solutions to exercises. Those are example programs that 
should cover the main approaches to the implementation. For example, searching 
for an integer in an ordered array can be done with a linear search, or better, 
using a binary search.

Reference solutions can be evaluated on demand, using a selected hardware group. 
The evaluation results are stored and can be used later to determine limits. In 
our example problem, we could configure the limits so that the linear 
search-based program doesn't finish in time on larger inputs, but a binary 
search does.

Note that separate reference solutions should be supplied for all supported 
runtime environments.

### Exercise assignments

@todo: Creating instances of an exercise for a specific group of users,
capabilities of settings. Editing limits according to the reference
solution.

Evaluation process
------------------

@todo: How the evaluation process works on the Frontend side.

### Uploading files and file storage

@todo: One by one upload endpoint. Explain different types of the
Uploaded files.

### Automatic detection of the runtime environment

@todo: Users must submit correctly named files – assuming the RTE from
the extensions.

REST API implementation
-----------------------

@todo: What is the REST API, what are the basic principles – GET, POST,
Headers, JSON.

### Authentication and authorization scopes

@todo: How authentication works – signed JWT, headers, expiration,
refreshing. Token scopes usage.

### HTTP requests handling

@todo: Router and routes with specific HTTP methods, preflight, required
headers

### HTTP responses format

@todo: Describe the JSON structure convention of success and error
responses

### Used technologies

@todo: PHP7 – how it is used for typehints, Nette framework – how it is
used for routing, Presenters actions endpoints, exceptions and
ErrorPresenter, Doctrine 2 – database abstraction, entities and
repositories + conventions, Communication over ZMQ – describe the
problem with the extension and how we reported it and how to treat it in
the future when the bug is solved. Relational database – we use MariaDB,
Doctine enables us to switch the engine to a different engine if needed

### Data model

@todo: Describe the code-first approach using the Doctrine entities, how
the entities map onto the database schema (refer to the attached schemas
of entities and relational database models), describe the logical
grouping of entities and how they are related:

-   user + settings + logins + ACL
-   instance + licenses + groups + group membership
-   exercise + assignments + localized assignments + runtime
    environments + hardware groups
-   submission + solution + reference solution + solution evaluation
-   comment threads + comments

### API endpoints

@todo: Tell the user about the generated API reference and how the
Swagger UI can be used to access the API directly.

Web Application
---------------

@todo: What is the purpose of the web application and how it interacts
with the REST API.

### Used technologies

@todo: Briefly introduce the used technologies like React, Redux and the
build process. For further details refer to the GitHub wiki

### How to use the application

@todo: Describe the user documentation and the FAQ page.

Backend-Frontend communication protocol
=======================================

@todo: describe the exact methods and respective commands for the
communication

Initiation of a job evaluation
------------------------------

@todo: How does the Frontend initiate the evaluation and how the Backend
can accept it or decline it

Job processing progress monitoring
----------------------------------

When evaluating a job the worker sends progress messages on predefined points of
evaluation chain. The sending place can be on very beginning of the job, when
submit archive is downloaded or at the end of each simple task with its state
(completed, failed, skipped). These messages are sent to broker through existing
ZeroMQ connection. Detailed format of messages can be found on [communication
page](https://github.com/ReCodEx/wiki/wiki/Overall-architecture#commands-from-worker-to-broker).

Broker only resends received progress messages to the monitor component via
ZeroMQ socket. The output message format is the same as the input format.

Monitor parses received messages to JSON format, which is easy to work with in
JavaScript inside web application. All messages are cached (one queue per job)
and can be obtained multiple times through WebSocket communication channel. The
cache is cleared 5 minutes after receiving last message.

Publishing of the results
-------------------------

After job finish the worker packs results directory into single archive and
uploads it to the fileserver through HTTP protocol. The target URL is obtained
from API in headers on job initiation. Then "job done" notification request is
performed to API via broker. Special submissions (reference or asynchronous
submissions) are loaded immediately, other types are loaded on-demand on first
results request.

Loading results means fetching archive from fileserver, parsing the main YAML
file generated by worker and saving data to the database. Also, points are
assigned by score calculator.

User documentation
==================

Web Application
---------------

@todo: Describe different scenarios of the usage of the Web App

### Terminology

@todo: Describe the terminology: Instance, User, Group, Student,
Supervisor, Admin

### Web application requirements

@todo: Describe the requirements of running the web application (modern
web browser, enabled CSS, JavaScript, Cookies & Local storage)


### Scenario \#1: Becoming a user of ReCodEx

#### How to create a user account?

You can create an account if you click on the “*Create account*” menu
item in the left sidebar. You can choose between two types of
registration methods – by creating a local account with a specific
password, or pairing your new account with an existing CAS UK account.

If you decide a new “*local*” account using the “*Create ReCodEx
account*” form, you will have to provide your details and choose a
password for your account. You will later sign in using your email
address as your username and the password you select.

If you decide to use the CAS UK, then we will verify your credentials
and access your name and email stored in the system and create your
account based on this information. You can change your personal
information or email later on the “*Settings*” page.

When crating your account both ways, you must select an instance your
account will belong to by default. The instance you will select will be
most likely your university or other organization you are a member of.

#### How to get into ReCodEx?

To log in, go to the homepage of ReCodEx and in the left sidebar choose
the menu item “*Sign in*”. Then you must enter your credentials into one
of the two forms – if you selected a password during registration, then
you should sign with your email and password in the first form called
“*Sign into ReCodEx*”. If you registered using the Charles University
Authentication Service (CAS), you should put your student’s number and
your CAS password into the second form called “Sign into ReCodEx using
CAS UK”.

#### How do I sign out of ReCodEx?

If you don’t use ReCodEx for a whole day, you will be logged out
automatically. However, we recommend you sign out of the application
after you finished your interaction with it. The logout button is placed
in the top section of the left sidebar right under your name. You will
have to expand the sidebar with a button next to the “*ReCodEx*” title
(shown in the picture below).

@todo: Simon's image

#### What to do when you cannot remember your password?

If you can’t remember your password and you don’t use CAS UK
authentication, then you can reset your password. You will find a link
saying “*You cannot remember what your password was? Reset your
password.*” under the sign in form. After you click on this link, you
will be asked to submit your email address. An email with a link
containing a special token will be sent to the address you fill in. We
make sure that the person who requested password resetting is really
you. When you click on the link (or you copy & paste it into your web
browser) you will be able to select a new password for your account. The
token is valid only for a couple of minutes, so do not forget to reset
the password as soon as possible, or you will have to request a new link
with a valid token.

If you sign in through CAS UK, then please follow the instructions
provided by the administrators of the service described on their
website.

#### How to configure your account?

There are several options you have to edit your user account.

-   changing your personal information (i.e., name)
-   changing your credentials (email and password)
-   updating your preferences (e.g., source code viewer/editor settings,
    default language)

You can access the settings page through the “*Settings*” button right
under your name in the left sidebar.


### Scenario \#2: User is a student

@todo: describe what it means to be a “student” and what are the
student’s rights

#### How to join a group for my class?

@todo: How to join a specific group

#### Which assignments do I have to solve? 

@todo: Where the student can find the list of the assignment he is
expected to solve, what is the first and second deadline.

#### Where can I see details of my classes’ group?

@todo: Where can the user see groups description and details, what
information is available.

#### How to submit a solution of an assignment?

@todo: How does a student submit his solution through the web app

#### Where are the results of my solutions?

@todo: When the results are ready and what the results mean and what to
do about them, when the user is convinced, that his solution is correct
although the results say different

#### How can I discuss my solution with my teacher/group’s supervisor directly through the web application?

@todo: Describe the comments thread behavior (public/private comments),
who else can see the comments, how notifications work (*not implemented
yet*!).


### Scenario \#3: User is supervisor of a group

@todo: describe what it means to be a “supervisor” of a group and what
are the supervisors rights

#### How do I become a supervisor of a group?

@todo: How does a user become a supervisor of a group?

#### How to add or remove a student to my group?

@todo: How to add a specific student to a given group

#### How do I add another supervisor to my group?

@todo: who can add another supervisor, what would be the rights of the
second supervisor

#### How do I create a subgroup of my group?

@todo: What it means to create a subgroup and how to do it.

#### How do I assign an exercise to my students?

@todo: Describe how to access the database of the exercises and what are
the possibilities of assignment setup – availability, deadlines, points,
score configuration, limits

#### How do I configure the limits of an assignment and how to choose appropriate limits?

@todo: Describe the form and explain the concept of reference solutions.
How to evaluate the reference solutions for the exercise right now (to
get the up-to-date information).

#### How can I assign some exercises only to some students of the group?

@todo: Describe how to achieve this using subgroups

#### How can I see my students’ solutions?

@todo Describe where all the students’ solutions for a given assignment
can be found, where to look for all solutions of a given student, how to
see results of a specific student’s solution’s evaluation result.

#### Can I assign points to my students’ solutions manually instead of depending on automatic scoring?

@todo If and how to change the score of a solution – assignment
settings, setting points, bonus points, accepting a solution (*not
implemented yet!*). Describe how the student and supervisor will still
be able to see the percentage received from the automatic scoring, but
the awarded points will be overridden.

#### How can I discuss student’s solution with him/her directly through the web application?

@todo: Describe the comments thread behavior (public/private comments),
who else can see the comments -- same as from the student perspective


### Writing job configuration

To run and evaluate an exercise the backend needs to know the steps how to do
that. This is different for each environment (operation system, programming
language, etc.), so each of the environments needs to have separate
configuration.

Backend works with a powerful, but quite low level description of simple
connected tasks written in YAML syntax. More about the syntax and general task
overview can be found on [separate
page](https://github.com/ReCodEx/wiki/wiki/Assignments). One of the planned
features was user friendly configuration editor, but due to tight deadline and
team composition it did not make it to the first release. However, writing
configuration in the basic format will be always available and allows users to 
use the full expressive power of the system.

This section walks through creation of job configuration for _hello world_
exercise. The goal is to compile file _source.c_ and check if it prints `Hello
World!` to the standard output. This is the only test case, let's call it
**A**.

The problem can be split into several tasks:

- compile _source.c_ into _helloworld_ with `/usr/bin/gcc`
- run _helloworld_ and save standard output into _out.txt_
- fetch predefined output (suppose it is already uploaded to fileserver) with
  hash `a0b65939670bc2c010f4d5d6a0b3e4e4590fb92b` to _reference.txt_
- compare _out.txt_ and _reference.txt_ by `/usr/bin/diff`

The absolute path of tools can be obtained from system administrator. However,
`/usr/bin/gcc` is location, where the GCC binary is available almost everywhere,
so location of some tools can be (professionally) guessed.

First, write header of the job to the configuration file. 

```{.yml}
submission:
    job-id: hello-word-job
    hw-groups:
        - group1
```

Basically it means, that the job _hello-world-job_ needs to be run on workers
that belong to the `group_1` hardware group . Reference files are downloaded 
from the default location configured in API (such as 
`http://localhost:9999/exercises`) if not stated explicitly otherwise. Job 
execution log will not be saved to result archive.

Next the tasks have to be constructed under _tasks_ section. In this demo job,
every task depends only on previous one. The first task has input file
_source.c_ (if submitted by user) already available in working directory, so
just call the GCC. Compilation is run in sandbox as any other external program
and should have relaxed time and memory limits. In this scenario, worker
defaults are used. If compilation fails, the whole job is immediately terminated
(because the _fatal-failure_ bit is set). Because _bound-directories_ option in 
sandbox limits section is mostly shared between all tasks, it can be set in 
worker configuration instead of job configuration (suppose this for following 
tasks). For configuration of workers please contact your administrator.

```{.yml}
- task-id: "compilation"
  type: "initiation"
  fatal-failure: true
  cmd:
      bin: "/usr/bin/gcc"
      args:
          - "source.c"
          - "-o"
          - "helloworld"
  sandbox:
      name: "isolate"
      limits:
          - hw-group-id: group1
            chdir: ${EVAL_DIR}
            bound-directories:
                - src: ${SOURCE_DIR}
                  dst: ${EVAL_DIR}
                  mode: RW
```

The compiled program is executed with time and memory limit set and the standard
output is redirected to a file. This task depends on _compilation_ task, because
the program cannot be executed without being compiled first. It is important to
mark this task with _execution_ type, so exceeded limits will be reported in
frontend.

Time and memory limits set directly for a task have higher priority than worker
defaults. One important constraint is, that these limits cannot exceed limits
set by workers. Worker defaults are present as a safety measure so that a 
malformed job configuration cannot block the worker forever. Worker default 
limits should be reasonably high, like a gigabyte of memory and several hours of 
execution time. For exact numbers please contact your administrator.

It is important to know that if the output of a program (both standard and 
error) is redirected to a file, the sandbox disk quotas apply to that file, as 
well as the files created directly by the program. In case the outputs are 
ignored, they are redirected to `/dev/null`, which means there is no limit on 
the output length (as long as the printing fits in the time limit).

```{.yml}
- task-id: "execution_1"
  test-id: "A"
  type: "execution"
  dependencies:
      - compilation
  cmd:
      bin: "helloworld"
  sandbox:
      name: "isolate"
      stdout: ${EVAL_DIR}/out.txt
      limits:
          - hw-group-id: group1
            chdir: ${EVAL_DIR}
            time: 0.5
            memory: 8192
```

Fetch sample solution from file server. Base URL of file server is in the header 
of the job configuration, so only the name of required file (its `sha1sum` in 
our case) is necessary.

```{.yml}
- task-id: "fetch_solution_1"
  test-id: "A"
  dependencies:
      - execution
  cmd:
      bin: "fetch"
      args:
          - "a0b65939670bc2c010f4d5d6a0b3e4e4590fb92b"
          - "${SOURCE_DIR}/reference.txt"
```

Comparison of results is quite straightforward. It is important to set the task
type to _evaluation_, so that the return code is set to 0 if the program is
correct and 1 otherwise. We do not set our own limits, so the default limits are
used.

```{.yml}
- task-id: "judge_1"
  test-id: "A"
  type: "evaluation"
  dependencies:
      - fetch_solution_1
  cmd:
      bin: "/usr/bin/diff"
      args:
          - "out.txt"
          - "reference.txt"
  sandbox:
      name: "isolate"
      limits:
          - hw-group-id: group1
            chdir: ${EVAL_DIR} 
```
<!---
// vim: set formatoptions=tqn flp+=\\\|^\\*\\s* textwidth=80 colorcolumn=+1:
-->