/*
 * My first project
 *
 * It blinks LEDs like counting in binary, when the button is pressed, it reverses the order
 *
 * Build on top of libopenocm3, blackbox parts of code (setup()) copied from
 * libopencm3-examples/examples/stm32/f1/stm32vl-discovery/button project
 *
 * Open source licence, let's say Artistic Licence, although it doesn't matter, as it is local only
 */

#include <libopencm3/stm32/rcc.h>
#include <libopencm3/stm32/gpio.h>
#include <stdbool.h>

//#define DELAY 8000000		// Should be a second, or maybe not (second iff 8MHz clk, 1/3second if 24MHz clk)			// Too long!!
#define DELAY 400000		// This is bad -- it's a value that was found to be OK
#define STM32F1 1			// Needed for libopencm3

void setup (void) {			// All the blackbox code
	rcc_clock_setup_in_hse_8mhz_out_24mhz();
	rcc_periph_clock_enable(RCC_GPIOC);
	rcc_periph_clock_enable(RCC_GPIOA);
	gpio_set_mode(GPIOC, GPIO_MODE_OUTPUT_50_MHZ, GPIO_CNF_OUTPUT_PUSHPULL, GPIO8 | GPIO9);
	gpio_set_mode(GPIOA, GPIO_MODE_INPUT, GPIO_CNF_INPUT_FLOAT, GPIO0);
}

int main (void) {
	setup();

	gpio_clear(GPIOC, GPIO8 | GPIO9);
	while (gpio_get(GPIOA, GPIO0) == 0);

	// Array of what leds should be on
	uint16_t states[4] = {0, GPIO9, GPIO8, GPIO9 | GPIO8};
	enum {FORWARD, BACKWARD} direction = FORWARD;
	bool pressed = true;
	bool change = false;
	char state = 0;
	int timer;

	while (true) {
		timer = DELAY;
		change = false;
		repeat:
		if (/*Button pressed, but was not*/ gpio_get(GPIOA, GPIO0) && (pressed == false) ) {
			pressed = true;
			if (change == false) {
				direction = (direction == FORWARD ? BACKWARD : FORWARD);	// Switch direction
				change = true;
			}
		} else if (/*Button not pressed*/gpio_get(GPIOA, GPIO0) == 0)  {
			pressed = false;
		}
		timer--;
		if (timer > 0) goto repeat;
		state = (direction == FORWARD ? (state + 1)%4 : (/*state+4-1*/ state+3)%4 );

		gpio_set(GPIOC, states[state]);
		gpio_clear(GPIOC, (GPIO8 | GPIO9) ^ states[state]);
	}
	return 0;
}