The code works better

.gitignore was also added

.gitignore

@@ -0,0 +1,5 @@
+*.d
+*.o
+*.bin
+*.elf
+*.map

main.c

@@ -13,7 +13,8 @@
 #include <libopencm3/stm32/gpio.h>
 #include <stdbool.h>
 
-#define DELAY 8000000		// Should be a second, or maybe not (second iff 8MHz clk, 1/3second if 24MHz clk)
+//#define DELAY 8000000		// Should be a second, or maybe not (second iff 8MHz clk, 1/3second if 24MHz clk)			// Too long!!
+#define DELAY 400000		// This is bad -- it's a value that was found to be OK
 #define STM32F1 1			// Needed for libopencm3
 
 void setup (void) {			// All the blackbox code
@@ -24,12 +25,6 @@ void setup (void) {			// All the blackbox code
 	gpio_set_mode(GPIOA, GPIO_MODE_INPUT, GPIO_CNF_INPUT_FLOAT, GPIO0);
 }
 
-inline void wait (int ticks) {	// This works in libopenocm3 examples
-	int i;
-	for (i=0;i<ticks;i++) __asm__("nop");
-	return;
-}
-
 int main (void) {
 	setup();
 
@@ -40,21 +35,29 @@ int main (void) {
 	uint16_t states[4] = {0, GPIO9, GPIO8, GPIO9 | GPIO8};
 	enum {FORWARD, BACKWARD} direction = FORWARD;
 	bool pressed = true;
-	char state;
+	bool change = false;
+	char state = 0;
+	int timer;
 
 	while (true) {
+		timer = DELAY;
+		change = false;
+		repeat:
 		if (/*Button pressed, but was not*/ gpio_get(GPIOA, GPIO0) && (pressed == false) ) {
 			pressed = true;
+			if (change == false) {
 				direction = (direction == FORWARD ? BACKWARD : FORWARD);	// Switch direction
-		} else /*Button not pressed, possibly released*/ {
+				change = true;
+			}
+		} else if (/*Button not pressed*/gpio_get(GPIOA, GPIO0) == 0)  {
 			pressed = false;
 		}
+		timer--;
+		if (timer > 0) goto repeat;
 		state = (direction == FORWARD ? (state + 1)%4 : (/*state+4-1*/ state+3)%4 );
 
-		gpio_set(GPIOC, states[state]);		//FIXME: This doesn't work, as it does not write 0s to unmentioned pins!!
+		gpio_set(GPIOC, states[state]);
-		gpio_clear(GPIOC, (GPIO8 | GPIO9) ^ states[state]);		// Does this fix that?
+		gpio_clear(GPIOC, (GPIO8 | GPIO9) ^ states[state]);
-
-		wait(DELAY);
 	}
 	return 0;
 }