recodex-wiki/Broker.md

# Broker

The broker is a central part of the ReCodEx backend that directs almost all 
communication. It was designed to properly maintain heavy load of messages
by making only small actions in main communication thread and asynchronous
execution of other actions.

## Description

The broker's responsibilites are:

- allowing workers to register themselves and keep track of their capabilities
- tracking status of each worker and handle cases when they crash
- accepting assignment evaluation requests from the frontend and forwarding them 
  to workers
- receiving job status information from workers and forward it to the frontend 
  either via monitor or REST API
- notifying the frontend of errors in the backend

## Architecture

The broker uses our ZeroMQ _reactor_ to bind events on sockets to handler classes. 
There are currently two handlers - one that handles the main functionality and 
another one that sends status reports to the REST API asynchronously so that the 
broker does not have to wait for HTTP requests which can take a lot of time, 
especially when some kind of error happens on the server.

### Worker registry

The `worker_registry` class is used to store information about workers, their 
status and the jobs in their queue. It can look up a worker using the headers 
received with a request. It also uses a basic load balancing algorithm - the 
workers are contained in a queue and whenever one of them receives a job, it is 
moved to the back, which makes it less likely to receive another job soon.

When a worker is assigned a job, it will not be assigned another one until we 
receive a `done` message from it.

### Error handling

**Job failure** - we recognize two ways a job can fail - an internally and 
externally. An internal failure is the worker's fault - for example when it 
cannot download a file needed for the evaluation for some reason. An external 
error is for example when the job configuration is malformed. Note that we do not 
consider a student entering an incorrect solution a job failure.

Jobs that failed internally are reassigned until a limit on the amount of 
reassingments (configurable with the `max_request_failures` option) is reached. 
External failures are reported to the frontend immediately.

**Worker failure** - when a worker crash is detected, we attempt to reassign its 
current job and also all the jobs from its queue. Because the current job might 
be the reason of the crash, its reassignment is also counted towards the 
`max_request_failures` limit (the counter is shared). If there is no worker that 
could process a job (i.e. it cannot be reassigned), the job is reported as 
failed to the frontend via REST API.

**Broker failure** - when the broker itself crashed and is restarted, workers 
will reconnect automatically. However, all jobs in their queues are lost. If a 
worker manages to finish a job and notifies the "new" broker, the report is 
forwarded to the frontend. The same goes for external failures. Jobs that fail 
internally cannot be reassigned, because the "new" broker does not know their 
headers - they are reported as failed immediately.

## Installation

### Dependencies

Broker has similar basic dependencies as worker, for recapitulation:

- ZeroMQ in version at least 4.0, packages `zeromq` and `zeromq-devel` (`libzmq3-dev` on Debian)
- YAML-CPP library, `yaml-cpp` and `yaml-cpp-devel` (`libyaml-cpp0.5v5` and `libyaml-cpp-dev` on Debian)
- libcurl library `libcurl-devel` (`libcurl4-gnutls-dev` on Debian)

### Clone broker source code repository
```
$ git clone https://github.com/ReCodEx/broker.git
$ git submodule update --init
```

### Install broker
It is supposed that your current working directory is that one with clonned worker source codes.

- Prepare environment running `mkdir build && cd build`
- Build sources by `cmake ..` following by `make -j#` where `#` symbol refers to number of your CPU threads.
- Build binary package by `make package` (may require root permissions).
Note that `rpm` and `deb` packages are build in the same time. You may need to have `rpmbuild` command (usually as `rpmbuild` or `rpm` package) or edit CPACK_GENERATOR variable _CMakeLists.txt_ file in root of source code tree.
- Install generated package through your package manager (`yum`, `dnf`, `dpkg`).

_Note:_ If you do not want to generate binary packages, you can just install the project with `make install` (as root). But installation through your distribution's package manager is preferred way to keep your system clean and manageable in long term horizon.


## Configuration and usage
Following text describes how to set up and run broker program. It is supposed to have required binaries installed. Also, using systemd is recommended for best user experience, but it is not required. Almost all modern Linux distributions are using systemd now.

Installation of broker program does following step to your computer:

- create config file `/etc/recodex/broker/config.yml`
- create _systemd_ unit file `/etc/systemd/system/recodex-broker.service`
- put main binary to `/usr/bin/recodex-broker`
- create system user and group `recodex` with nologin shell (if not existing)
- create log directory `/var/log/recodex`
- set ownership of config (`/etc/recodex`) and log (`/var/log/recodex`) directories to `recodex` user and group

### Default broker configuration

#### Configuration items

Description of configurable items in broker's config. Mandatory items are bold, optional italic.

- _clients_ -- specifies address and port to bind for clients (eq. frontends)
    - _address_ -- hostname or IP address as string (`*` for any)
    - _port_ -- desired port
- _workers_ -- specifies address and port to bind for workers
    - _address_ -- hostname or IP address as string (`*` for any)
    - _port_ -- desired port
    - _max_liveness_ -- maximum amount of pings the worker can fail to send before it is considered disconnected
    - _max_request_failures_ -- maximum number of times a job can fail (due to e.g. worker disconnect or a network error when downloading something from the fileserver) and be assigned again 
- _monitor_ -- settings of monitor service connection
    - _address_ -- IP address of running monitor service
    - _port_ -- desired port
- _notifier_ -- details of connection which is used in case of errors and good to know states
    - _address_ -- address where frontend API runs
    - _port_ -- desired port
    - _username_ -- username which can be used for HTTP authentication
    - _password_ -- password which can be used for HTTP authentication
- _logger_ -- settings of logging capabilities
    - _file_ -- path to the logging file with name without suffix. `/var/log/recodex/broker` item will produce `broker.log`, `broker.1.log`, ...
    - _level_ -- level of logging, one of `off`, `emerg`, `alert`, `critical`, `err`, `warn`, `notice`, `info` and `debug`
    - _max-size_ -- maximal size of log file before rotating
    - _rotations_ -- number of rotation kept

#### Example config file

```{.yml}
# Address and port for clients (frontend)
clients:
    address: "*"
    port: 9658  # Address and port for workers
workers:
    address: "*"
    port: 9657
    max_liveness: 10
    max_request_failures: 3
monitor:
    address: "127.0.0.1"
    port: 7894
notifier:
    address: "127.0.0.1"
    port: 8080
    username: ""
    password: ""
logger:
    file: "/var/log/recodex/broker"  # w/o suffix - actual names will be
	                                 # broker.log, broker.1.log, ...
    level: "debug"  # level of logging
    max-size: 1048576  # 1 MB; max size of file before log rotation
    rotations: 3  # number of rotations kept
```

### Running broker

Running broker is very similar to the worker setup. There is also provided systemd unit file for convenient usage. There is only one broker per whole ReCodEx solution, so there is no need for systemd templates.

- Running broker can be done by following command:
```
# systemctl start recodex-broker.service
```
Check with
```
# systemctl status recodex-broker.service
```
if the broker is running. You should see "active (running)" message.

- Broker can be stopped or restarted accordigly using `systemctl stop` and `systemctl restart` commands.
- If you want to run broker after system startup, run:
```
# systemctl enable recodex-broker.service
```

For further information about using systemd please refer to systemd documentation.